Criss Pontiac Parts

telephone  cell 330-466-5621  Please leave message if no answer and I will get back to you as soon as possiable

e-mail ken@crisspontiacparts.com

Give us a call in days or evenings  as I am usually around home till about 9:30 eastern time  zone If no answer please leave message

 

Home ] Up ] internal parts ] links ] external parts ] engine building services ] blocks ] cyl. heads ] new products ]

 

     

Paper gasket page. This page contains Intake gaskets, Exhaust gaskets, oil pan gaskets fuel pump, oil filter, distributor gaskets, timing cover , water pump gaskets, water neck gasket and steel core rubber valve cover gaskets.

Above is a picture of the KRE 340 D gasket on a 290 CFM KRE D port aluminum head.  Notice how the gasket follows the contour of the head.  You will see no unsightly gasket material sticking out from the heads once your manifolds or headers are bolted up.  These gaskets also work well with all Pontiac cast iron heads as well.

120230 intake gasket for stock and350 cfm KRE high port and 310 d-port,310 e-heads

 

 .          060 thickness 1.20x2.30 opening  $11.00

            090 thickness 1.20x2.30 opening  $12.00  

 

           120240  intake gasket fits 325,340 cfm d-ports     250,365 cfm high ports,325,335cfm e-heads

           .060 thickness1.20x2.40 opening $12.00 

 

           .090 thickness1.20x2.40 opening $13.00

 

                    125250 fits 380 cfm high ports

           .060 thickness 1.25x2.50 opening  $12.00

           .090 thickness 1.25x2.50 opening  $13.00

 

                    130250 fits 400 cfm high port

           .060 thickness 1.30x2.50 opening $13.00  

          .090 thickness 1.30x2.50 opening $14.00

                    

                    

Above is a picture of the KRE 340 D gasket. You will see no unsightly gasket material sticking out from the heads once your manifolds or headers are bolted up.  These gaskets also work well with all Pontiac cast iron heads as well.

kre340d .125 thick

D-Port header gaskets $28.00

This exhaust gasket was modeled after the popular Felpro-1424 port openings.  This gasket is also made of compressed NON-asbestos material that has a non-stick coating applied to both sides of the gasket.  Can be used on both the KRE Aluminum D port head and Pontiac cast iron heads.

D-Port header gaskets $17.00

Also 1424t .125 thick (not pictured)

$28.00 

oil pan gasket set $18.00 

oil pan lip gasket $4.00 

Fuel pump gasket $1.50 

 

oil filter housing gasket $2.00 

Timing cover gasket $5.00 

Water pump gasket $2.00 

Water neck gasket $1.50  

5/16 thick Steel core rubber valve cover gaskets $22.00 

 

once you try these you won't use anything else

no more oil soaked, leaking cork gaskets

distributor gasket $1.50

 

 

 

 

 

 

Crisspontiacparts

8127 S.R.754

Shreve, Ohio

44676

last updated

11/02/2009