This Page contains Water necks, Billet-Tek valve covers, oil pan hold downs, Cam thrust plate kit, Stainless steel bolt kit, distributor clamps, Custom fuel pump block off plates, cam retainer
Pontiac Billet Aluminum Water Neck - 360 swivel
Our Pontiac billet aluminum 360° swivel water neck housings are CNC machined out of billet 6061-T6 aluminum. They are available with 1-1/2" fitting hose connection, 1-1/4" fitting hose connection, 12AN fitting or 16 AN fitting. The neck will swivel a full 360° for ease of hose connections in any position. The flange is sealed at the manifold with an o-ring.
Fits all Pontiac intakes!
$85.00
Pontiac Billet Aluminum Filler Water Neck - 360 swivel
Our Pontiac billet aluminum 360° swivel filler water neck housings are CNC machined out of billet 6061-T6 aluminum. They are available with 1-1/2" fitting hose connection, 1-1/4" fitting hose connection, 12AN fitting or 16 AN fitting. The neck will swivel a full 360° for ease of hose connections in any position. The flange is sealed at the manifold with an o-ring.
Fits all Pontiac intakes!
$125.00
These are our Billet-TEK custom built Pontiac valve covers. These aluminum valve covers can be custom made to your specifications. Other features include:
-
CNC machined piece
-
Thick CNC machined rails for perfect flatness and superior sealing
-
Our valve covers will clear high port intake and supercharger manifolds without any modifications
-
valve covers are available with stainless steel socket head cap screws or black oxide socket head cap screws and optional breather grommets
-
Grommet holes can be placed anywhere you want them
-
designed to clear ALL valve train components - poly locks and stud girdles!
-
Covers feature recessed bolt hole for a clean finished look
-
Pontiac Valve Covers w/ KRE logo
Also Tin Indian performance ,Pontiac logo and Pontiac logo with Indian head logo your choice $350.00
These valve covers are custom made to your specifications call for time frame for completion.
Custom logo's available at extra cost
Want to make your valve covers one of a kind? We offer custom valve cover engraving on all of our valve covers starting at $150.00. You are limited only by your imagination as to what you can put on the valve covers.
Oil Pan holddowns
These are CNC laser cut oil pan hold-downs to replace your stock missing ones! These help prevent oil pan distortion and get bolted down at the back of the oil pan area 1 for each side.
IMPROVED!
We now have these pieces heat treated for added strength and black oxide coated for corrosion protection!
$6.50
Setup for remote filtering of oil with this remote oil filter plate. It is CNC machined out of 6061T-6 aluminum and has been tapped with a 1/2" pipe tap for fitting aluminum AN fittings or hydraulic hose.
$35.00
This distributor hold down is CNC laser cut from 1/4" plate stainless steel. Perfect for using on the new rebuild or on your new KRE-MR1 block. Kit comes with hold down, bolt, and washer.
$20.00
This is KRE's new billet distributor hold down made from 6061T-6 Aluminum. This is just another fine product that they have designed on one of their in house CNC machines. Will fit both stock blocks and MR-1 aftermarket Pontiac blocks.
$35.00
Replace your lost or worn cam thrust plates with our CNC laser cut plates. These new cam thrust plate kits fit both MR-1 Pontiac blocks as well as stock Pontiac blocks. Kit comes with thrust plate, grade 8 lock washers and bolts.
$25.00
Pontiac Cam Retainer
If you want to remove your camshaft fuel pump eccentric, you will need to use this retainer. These on primarily used on full race engines or with electric fuel pump setups.
$5.00
This is a 150 piece stainless steel bolt kit. It comes in hex headed bolts. It's inexpensive and works very nice for finishing off an engine build. The kit includes timing cover, distributor hold down, intake, oil housing, oil pan, ,fuel block off, water pump, valve cover, and water housing bolts.
$48.00
Custom Fuel Pump Block Off Plate Kits
They are machined out of 6061T-6 Aluminum and a perfect match for any Pontiac engine that will be using an electric fuel pump. The kit comes with everything you see: the block off plate, gasket, 2 stainless steel bolts and 2 stainless steel washers. Pick from 1 of 4 designs..... Pontiac symbol, Indian head, Early Firebird, Late Firebird!
Indian Head $24.95
Pontiac Symbol 24.95
Early Firebird 24.95
Late Firebird $24.95