Tip mandrel drive setup works great for driving just about anything that uses belts off the front of your motor. This is a very adaptable unit with many different adjustments to suit your needs.
Our Pontiac Crank mandrel drives are
custom CNC machined out of 6061 aluminum. The
mandrel includes the following features:
Mandrel bolts directly to harmonic
balancer - You use your
stock crank bolt to bolt your harmonic balancer to your crank. You no
longer need to use mandrel systems that use 5 to 6 inch balancer bolts. Your
balancer is now reliably retained by a separate
bolt! Some harmonic balancer manufactures will not warrantee their
balancers if you use such a crank mandrel system.
Works with ALL
Pontiac harmonic balancers with standard BBC or Pontiac 4 bolt patterns AND
crank triggers!
Three 3/8 - 16 bolts not pictured but are included with the kit
Dual pulley bolt pattern – has both conventional 4 bolt Pontiac pulley pattern and the 3 bolt big block Chevy bolt pattern. Comes with cap screws to fit both 3/8-16 for BBC pattern and 5/16-24 for the standard 4 bolt Pontiac pattern.
FULLY ADJUSTIBLE!! 4 different locating spacers help with belt alignment. We can also custom machine spacers for you based on your spacing requirements. - Call for details
The standard Pontiac crank mandrel drive system comes
with the mandrel, 1 - 3 inch deep grove pulley, 4 alignment spacers, snout
cap and bolt. 4 inch pulleys ,
gilmer pulleys, and additional spacer kits are also available separately.
See below....
Want to run the TIP crank mandrel drive system and retain your stock 1969 and up lower crank pulley?
$160.00
Want to run the TIP crank mandrel drive system and retain your stock 1969 and up lower crank pulley?
$160.00
